Download AUTOMATIC CUTTING WITH ACCURACY AND EASE

TPEM014/0603
TRAVELING CUT-OFF SAW
CTS models
AUTOMATIC
CUTTING WITH
ACCURACY
AND EASE
Model CTS
shown with
optional servo
table travel
Conair’s new line of CTS Saws offer improved performance, larger standard cut capacities and are easy to
service.
The CTS traveling Cut-Off Saws accurately cut pipe,
or custom profiles to length as the product moves
through the extrusion line, eliminating the need for a
secondary cutting operation.
The simple operator interface, with front-mounted
controls, increases productivity by reducing training
time. CTS saws are available in a variety of sizes and
configurations.
Constructed for long life and low maintenance
Quality materials and workmanship
go into every CTS saw. Designed to
operate with low maintenance in most
production situations, each saw features heavy-duty, steel-welded construction. All components have been
plated, painted or built to resist corrosion. An Arbor motor eliminates all
belts in the drive train reducing maintenance and allows for higher blade
surface speed which gives you faster
cycle times.
Carbide tipped blades that have a
greater number of teeth to resist product melt are standard. Custom blade
styles are available.
All units have a full 24-inch table
travel.
You can order the optional cutlength programmer and dust collection system to reduce initial setup and
maintenance time. Choose the optional high speed servo table travel for
extreme cut-to-length repeatability.
■ MULTI-POSITION CLAMPS, GUIDES
Rubber clamping pads have quick-change pins for easy and
fast adjustment to match a variety of extrusion shapes.
Adjustable front and rear guides to feed product.
■ SERVO OPTION
Optional positional servo table travel eliminates costly secondary operations, offers extreme cut-to-length repeatability and
eliminates pneumatic adjustments for table travel.
■ EASY-TO-USE CONTROLS
Start and stop the saw, adjust blade travel, cutting speed and
clamping pressure from front-mounted controls.
■ EASY TO SERVICE
The new design has access doors on both ends of the saw, a
Nema-12 electrical enclosure with rotary lockable disconnect,
and a standard blade shroud for ease of vacuum dust/chip
removal.
■ AUTOMATIC CUTTING CYCLE
Once you set the clamp pressure, cutting speed and blade
travel, the saw cycles automatically. Add the optional cut
length programmer to automatically cut to a pre-set length.
One Conair Drive ● Pittsburgh, PA 15202 ● 412-312-6000 ● FAX 412-312-6227 ● www.conairnet.com
TPES014/0603
SPECIFICATIONS
TRAVELING CUT-OFF SAW
CTS Series
CTS-5, CTS-7 AND CTS-9
E
A
B
C
D
Side View
MODELS
Performance characteristics
Pipe capacity in. {mm} OD
Profile capacity in. {mm} HxW*
Blade size in. {mm}
Blade type
Blade drive motor Hp {kW}
Feed direction†
Dimensions in. {mm}
A - Height
B - Height to centerline
C - Width
D - Length
E - Table Travel
Weight lbs. {kg}‡
Installed
Shipping
Voltage Total Amps§
230V/3 phase/60 Hz
460V/3 phase/60 Hz
230V/3 phase/60 Hz (servo)
460V/3 phase/60 Hz (servo)
Compressed air requirement
Pressure psi {bars}
Consumption ft3/m {liter/sec}
NPT fitting size
Front View
CTS-5
CTS-7
CTS-9
5 {127}
4 x 8 {102 X 203}
18 {457}
carbide tipped
3 {2.2}
Right to left
7 {178}
5x13 {127 X 330}
23 {584}
carbide tipped
5 {3.7}
Right to left
9 {229}
6X17 {152 X 432}
27 {686}
carbide tipped
5 {3.7}
Right to left
57 {1448}
40 {1016}
46.5 {1181}
70 {1778}
24 {609}
60 {1524}
40 {1016}
57 {1448}
88 {2235}
24 {609}
63 {1600}
40.4 {1026}
61 {1549}
88 {2235}
24 {609}
575 {261}
675 {306}
825 {374}
925 {420}
1700 {771}
1800 {817}
9.7 A
4.9 A
26.2 A
13.1 A
15.1 A
7.6 A
30.6 A
15.3 A
15.1 A
7.6 A
30.6 A
15.3 A
80 {5.52}
5 {2.4}
3/8 in.
80 {5.52}
7 {3.3}
3/8 in.
80 {5.52}
8 {3.8}
3/8 in.
SPECIFICATION NOTES:
* The HxW dimension is provided for guidance only. The actual capacity can vary depending on the profile you are
trying to produce.
† Left to right feed direction is available as an option.
‡ If the optional chip collection system is ordered, add 50 lbs. {22.7 kg} to to the installed and shipping weights.
§ The optional chip collection system adds 6 A on 230V models; 3 A on 460V models.
One Conair Drive ● Pittsburgh, PA 15202 ● 412-312-6000 ● FAX 412-312-6227 ● www.conairnet.com